![cisco asa 5505 cisco asa 5505](http://2.bp.blogspot.com/-i1MdLe7nH4M/UOn_oNZfXLI/AAAAAAAACcg/Wzgqqe4ylXw/w1200-h630-p-k-no-nu/ASA+comparisons.png)
Click the ‘+’ sign next to ‘DHCP Services’.I really dig having at least a couple DHCP addresses on every port. Put a check next to the ‘outside’ address pool.Under ‘Dynamic Translation’ change ‘Interface’ to ‘Outside’.Click the ‘…’ button on the right, and select the dmz network.Select the new interface ‘dmz’ from the drop down at the top.Click ‘Add’ at the top, select ‘Dynamic NAT Rule’.You’ll need to create a dynamic NAT for that. Great! You’ve created the interface, but you want to be able to browse to the outside. Under Block Traffic, select ‘vlan1 (inside)’.Having vlans 1, 2, and 12 or whatever is just dorky. In the ip address field, enter the new interfaces ip, but on an un-used subnet.Make sure ‘Use Static IP’ radio button is checked.I recommend using ‘dmz’ for the network interface, and security level ’50’.Specify the network jacks you want to be on the new vlan.Click ‘Configuration’ at the top, ‘Interfaces’ on the left.Also, one person is allowed to use the site-to-site vpn, and the other is not. This allows us to have two peoples workstations on the same ASA5505 device, but they don’t have the ability to infect one another. All I needed for my network was to have two network segments which had external access, but could not communicate with each other.
#Cisco asa 5505 how to#
With the base license you can create another interface and vlan, but you must restrict traffic from that interface to another.īelow I’m going to tell you how to set up a DMZ on your Cisco ASA5505.
![cisco asa 5505 cisco asa 5505](https://pictures-kenya.jijistatic.com/4495307_img-20191108-122417_1600x2134.jpg)
Even your Cisco ASA5505 can have a DMZ, though not a full one.